Archive

Posts Tagged ‘craftsman kit homes’

Quite Possibly, The Most Beautiful Elsmore in the World

December 10th, 2012 Sears Homes 9 comments

The Elsmore was a hugely popular house for Sears, and it was probably one of their top five best selling models.

Since all sales records were destroyed during a post-WW2 corporate housecleaning at Sears, it’s hard to know for sure, but I do know that I’ve seen a whole lot of Elsmores in my travels.

Earlier this year, I posted another blog on the Elsmore (click here to see that), but I was inspired to post a second blog, due to this home’s incredible popularity and also because Cindy Catanzaro found and photographed one of the prettiest (and most well-cared-for) Elsmores that I’ve ever seen.

To read more on the Elsmore, click here.

Refinement and Comfort here.  How elegant sounding!

"Refinement and Comfort here." Sounds lovely!!

*

Heres an Elsmore that was built in Cairo, IL not far from the spot where Sears had their 40-acre mill.

Here's an Elsmore that was built in Cairo, IL not far from the spot where Sears had their 40-acre lumber mill. This Elsmore, built at 1501 Commerce Avenue, was torn down pre-2001. I visited Cairo then and went looking for this house, but 1501 Commerce was an empty lot at that point. How many Sears Homes in Cairo have been razed? It's a vexing question.

*

Another vintage Elsmore.

Another vintage Elsmore. This one was in Glenshaw, PA (1919 catalog).

*

This is one of my favorite Elsmores. Its in Park Ridge, Illiois. Picture perfect in every way. Photo is copyright 2010, Dale Patrick Wolicki and may not be used or reproduced without written permission.

This is one of my favorite Elsmores. It's in Park Ridge, Illinois. Picture perfect in every way. Photo is copyright 2010, Dale Patrick Wolicki and may not be used or reproduced without written permission.

Visit Dale’s website by clicking here.

And the crème de la crème

And the crème de la crème. Cindy Catazaro found this house in Oakwood Ohio and it has been lovingly and faithfully restored. The house has obviously had some "renovations," but they've been done in a thoughtful, sensitive manner. I'm so impressed to know that there are people in the world who love their Sears House *this* much! Photo is copyright 2012, Cindy Catazaro and may not be used or reproduced without written permission.

*

An mini-Elsmore? It might be a trick of the eye, but it appears this Elsmore in Walnutport, PA is a little narrower than the catalog version.

An skinny mini-Elsmore? It might be a trick of the eye, but it appears this Elsmore in Walnutport, PA is a little narrower than the catalog version. The window arrangement is also a little different. I'd love to know the history behind this house. Photo is copyright 2012 Angela Laury and may not be used or reproduced without written permission.

*

The Elsmore, as it appeared in the later 1910s and 20s was actually a remodel of this

The Elsmore, as it appeared in the later 1910s and 20s was actually a remodel of Modern Home #126, which was first offered in the 1908 (first) Sears Modern Homes catalog.

*

If you compare the two floorplans, youll see how similar they really are.

If you compare the two floorplans, you'll see how similar they are. This is the floorplan for the Sears Modern Home #126 (1908). Notice the size of the rooms and placement of windows.

*

Floor

And here's the floorplan for the Elsmore (1916). The chamfered corners are gone and the front porch is different, but the rest of the house is the same, down to window placement and room size. The front porch roof on Modern Home #126 (with cantilevers) *always* sagged due to its fantastic weight. Not a good design. The changes to the Elsmore porch fixed that problem.

*

Thanks to Cindy Catazaro and Dale Wolicki for providing such beautiful photos!

To read more about the Elsmore, click here.

To visit Dale’s website, click here.

Did you enjoy this blog? Please take a moment and leave a nice comment below. I’m living on nothing but love.

:)

*   *   *

Cooking - Off the Grid!

November 24th, 2012 Sears Homes 3 comments

As has become our annual tradition, hubby cooked our 18-pound turkey on his Weber Charcoal Grill. It was one of the most delicious birds I’ve ever enjoyed. The best part was that it was cooked 100% “off the grid.”

The charcoal is a no-brainer. Lots of people know how to use charcoal to cook their meat.

But the secret of a well-cooked bird  is the rotisserie attachment which spins the meat at a slow speed. This year, the small but powerful rotisserie motor was powered  by our new “Solar System,” three 15-watt solar panels which we recently installed at The Ringer Ranch.

These three photovoltaic panels convert the sun’s rays into electricity, which is stored in a 12-volt deep-cycle marine battery. The inverter (shown below) converts the 12-volt system into 120 volts, suitable for household use.

To learn more about how we installed these solar panels, click here.

Hubby proudly points out his delicious turkey spinning on the grill.

Hubby proudly points out his delicious turkey spinning on the grill.

*

Look

Our three 15-watt solar panels are on top of the shed roof.

*

The electrical items (inverter, solar controller and battery) are inside the shed.

The electrical items (inverter, solar controller and battery) are inside the shed. Notice the orange extension cord coming out of the inverter? That is powering the rotisserie.

*

The most amazing part is that the solar panels were charging the battery *faster* than the rotisserie motor was drawing off power.

The most amazing part is that the solar panels were charging the battery *faster* than the rotisserie motor was drawing off power. And this was at 8:00 am.

*

Safety first. Hubby uses the five-gallon bucket to keep the cords out of the wet dew.

Safety first. Hubby uses the five-gallon bucket to keep the cords out of the wet dew.

*

It was indeed a most splendiferous bird!

It was indeed a most splendiferous bird!

*

Want a “solar system” of your own? We did it for $351 (total cost). To buy your own, click here.

*

To learn more about Sears Homes, click here.

*

To read about a very happy Thanksgiving in 1918, click here.

*   *   *

Categories: Uncategorized Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

It’s Official: I’m Now a Ham (Part V)

November 20th, 2012 Sears Homes 4 comments

One of the most interesting features  of Ham Radio is that its operators are expected to have access to alternative energy sources during times of regional or national emergency.

After all, what good is it to have a Ham Radio if you can’t use it when the power goes out?

For as many years as I can remember, I have been utterly fascinated by alternative energy sources. Capturing a tiny drop of the sun’s massive nuclear-reactive power (386 billion billion megaWatts) is a  fascinating concept.

After several tours of Mike Neal’s very own “Radio Shack,” and after receiving several helpful tutorials on this topic from Mr. Neal (and lots of specific guidance), I was ready to take the plunge.

My “solar project” started in earnest about a month ago when Mike sent me an email to let me know that Harbor Freight was having a sale on solar panels. This was the very set that Mike had at his house and he said it was “a good solar set-up for the money.”

With a $30 coupon (gifted to me from a fellow Ham), I got the $229 solar panels for $159. (The original price for the panels was $229, with a sale price of $189. The $30 coupon got me to $159.)

Because I’m highly allergic to crowds and shopping areas and loud noises and small children and fluorescent lights, I paid the extra six bucks to have the unit shipped directly to my house. It was well worth it.

It took about 12 hours to install the whole rig, and my oh my, it was a fun project. And watching those photovoltaic cells turn the sunlight into electricity is every bit as fascinating as I’d thought it would be.

If I were queen of the world (and it shouldn’t be long now), I’d recommend that every homeowner in America have a set of these on their roof. It was a great learning experience. And I’ve shared all the nitty-gritty details below.

To read more about my experiences with Ham Radio, check out Part I, Part II, Part III and Part IV of this series.

House shed

The little shed in our back yard is now electrified, thanks to these three solar panels on the roof. Each panel produces 15 watts, for a total of 45 watts.

*

solar thunder

I'm not sure why a corporation would adopt the name "THUNDERBOLT" for their solar products. Nonetheless, it's a sound value and seems to be a well-made product.

*

Solar panels

The solar panels were set on a 2x4 which was fastened with screws into the roof and painted flat black. The PVC frame was secured to the 2x4 with 3/4" metal pipe clamps. This will enables us to change the angle of the panels (for winter and summer) without any major disassembling.

*

house house house

This shot shows the panels and 2x4 more closely. In a mere 12 hours, the solar panels have already been assaulted by both birds (far left) and pine straw (bottom).

*

Thinking about how to get the leads into the little shed took some thinking.

Figuring out how to get the leads into the little shed took some thinking. In the end, I decided to drill a hole (3/4") through the 2x4 (and the roofing sheathing below). I reasoned that it'd be easier to patch a clean hole through a piece of lumber rather than trying to patch a hole in an irregular surface (such as an old roofing shingle).

*

solar

Using stretchy weatherproofing tape (which probably has a much better name), I bound those three wires (from the three solar panels) together and fed them through the hole into the shed's interior. I purposefully used a lot of tape so it would fill the 3/4" hole. For the tiny gaps that remained, I used a compound putty substance (again, don't know the name but it looks a lot like Silly Putty). Back in the day, a contractor friend told me it was called "Dum Dum" because you use it to patch a dumb mistake. However, I'd like to point out that it should be called "Smart Smart" in this particular application.

*

Inside,

Inside, the wires drop down from above and into the controller (right side on the shelf above the battery). From there, the wires go into the 12-volt deep cycle Marine battery. Another set of wires carries the power from the battery back to the inverter (left side on the shelf). The inverter turns the 12-volt current into 120 volts (for household use).

*

The

The controller that came with the solar panels is quite impressive. The digital display is large and easy to read, and reports on the battery power (12.4 volts shown here). For $159, it's a pretty fancy set-up and a darn good deal.

*

Another nice bonus that came with this set are these 12-volt LED lights. They do a good job of illuminating the dark corners of our little shed.

Another nice bonus that came with this set are two of these 12-volt LED lights. They do a good job of illuminating the dark corners of our little shed. They plug into the front of the controller (as shown in the picture of the controller above).

*

The inverter (shown above) was not included in the kit. This 750-watt inverter also came from Harbor Freight. I also got it on sale. As I recall, it was $69 on sale for  $49, and I found a $10 coupon. Final price $39.

The inverter (shown above) was not included in the kit. This 750-watt inverter also came from Harbor Freight. I also got it on sale. As I recall, it was $69 on sale for $49, and I found a $10 coupon. Final price $39.

*

Part of the problem I encountered was that, despite my reading and studying, I didnt understand a whole lot about how these things work.

Part of the problem I encountered whilst doing this project was, despite my reading and studying, I didn't understand a whole lot about how all these things work together. I asked Mike Neal, "What's the difference between a 200-watt inverter and a 750-watt inverter?" Fact is, a 200-watt inverter was whole lot cheaper. Mike explained, "Think of the battery as a bucket full of water. You can draw that water out with a swizzle stick or a milk-shake straw. The 200-watt inverter is a swizzle stick. The 750-watt inverter is a milk-shake straw."

*

The

The other helper in this project was my wonderful neighbor, Mike Mancini. I told him that I needed a deep-cycle marine battery and he got me a good deal on one at a local marine parts supply company. Plus, he gave me a ride out to the place and then hefted it out of his truck and out to my shed. This battery weighs about 50 pounds. I set it up on cinder blocks to make it easier to access, and I put the OSB down because I'd heard that batteries might discharge if placed directly atop masonry.

*

Fie dollahs

You may notice the fine-looking wires shown in the picture above (of the battery). I bought these booster cables at General Dollar Store and paid $5 for the whole affair. I then cut the wires off from the clips and used them for the controller-to-battery run and the battery-to-inverter run. It's 10-gauge stranded copper wire.

*

The

The last part of the project required anchoring the panels to the roof. In that the panels sit so high above the roof, they'll become a dandy sail in strong winds. Our solution was to tether the pvc frame to the opposite side of the shed. For the tether, I used 10-gauge stranded copper grounding wire. May seem like a waste, but I recently bought a spool of it to ground a couple antennas and masts and such. Seems I had about 400 feet left over from those other projects.

*

Solar

Close-up of the tether on the PVC frame. It's not super taut, but it doesn't need to be. It's anchored into the steep side of the shed roof with an eye-bolt.

*

Hubby and I spent countless hours figuring out the correct angle for these panels. There were many factors such aas the many tall trees in our yard,

Hubby and I spent countless hours figuring out the correct angle for these panels. There were many factors such as the big old tall trees in our yard. After the "Solar System" was all set up, we were both AMAZED and pleased to see that it started charging immediately. What was so amazing? It was a dark, cold, gloomy overcast day. I can hardly wait to see how it does with a little sunlight!

*

Total cost of the entire project:

Solar Panels - $159 plus $6 shipping (and tax)

Interstate battery - $114

750-watt inverter - $39

Battery terminals - $8

Wiring - $5  (thanks Dollar General!)

Incidentals - about $20 (zip ties, pipe clamps, tape)

Total investment:  $351

Entertainment value: Endless!  :)

*

To learn more about why Ham Radio is so relevant and important TODAY, click here.

To read about Sears Homes, click here.

If you wish to contact Rosemary, please leave a comment below.

*

Categories: Uncategorized Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Will The Real Sears “Del Rey” Please Stand Up?

October 11th, 2012 Sears Homes 3 comments

The Sears Del Ray was patterned after a popular design that popped up in several places in the late 1910s/early 1920s.

One hundred years later, it’s hard to figure out who deserves credit for designing this attractive bungalow.

The Sears Del Rey, as seen in the 1921 Sears Modern Homes catalog. From what I can glean, it first appeared in 1920 or 1919.

The Sears Del Rey, as seen in the 1921 Sears Modern Homes catalog. From what I can glean, it first appeared in their catalog in 1920 or 1919.

*

If I were a better woman, Id say that it started here.

In February 1922, this design won The "Blue Ribbon Award" in the popular building magazine, "American Carpenter and Builder."

*

The accompanying article in American Carpenter and Builder states, “I am a student at Sanford University, and I erected and completed this charming little residence with the assistance of one carpenter during my summer vacation. It was sold as soon as finished. I will build more during the coming year.”

In other words, in the early 1920s, a California college student spent his summer vacation building the Del Rey’s clone in the San Jose area.  (Reminds me of a song!  “Do you know the ‘Rey in San Jose?“)

*

Oopsie. Heres another one. This is Pacific Ready Cut Homes Moderl #385. Gosh, it looks just like a Del Rey too!

Oopsie. Here's another one. This is Pacific Ready Cut Homes Model #385. Gosh, it looks just like a Del Rey too! (1919 Pacific Ready Cut Homes.)

*

Personally, I find breathing houses worrisome.

Personally, I find "breathing houses" worrisome.

*

And heres a real San Jose in Tulsa, Oklahoma. Photo is copyright 2012 Rachel Shoemaker and may not be used or reproduced without written permission.

And here's a Del Rey in Tulsa, Oklahoma. Maybe. Or maybe it's the 1922 "Blue Ribbon Winner." Or maybe it's Pacific Ready Cut! Photo is copyright 2012 Rachel Shoemaker and may not be used or reproduced without written permission.

*

Ah, but here we have a bona fide Sears Del Rey, authenticated by Rebecca Hunter. This darling house is in Elgin, Illinois.

Ah, but here we have a bona fide Sears Del Rey, authenticated by Rebecca Hunter. This darling house is in Elgin, Illinois. The photo was snapped in 2002 (at Halloween)!

*

Floorplan for the Del Rey shows a sleeping porch that is usually converted into another bedroom (1921 catalog).

Floorplan for the Del Rey shows a screened porch (right rear) that is usually converted into another bedroom (1921 catalog).

*

Heres

In the 1924, Mr. Gray built this Del Ray in Ohio (from a testimonial published in the 1924 Sears Modern Homes catalog). Sure would be fun to find out if this REAL Del Rey is still standing.

*

According to the 1924 catalog, this Del Ray was built in Ohio.

Accompanying text gives the name and city. Is it still there?

*

Heres a Del Rey in Wheaton, IL.

Here's a Del Rey in Wheaton, IL.

*

This one is in Rocky Mount, NC.

This one is in Rocky Mount, NC.

*

Dale and I found this little house in Fullerton, California (oops, I THINK it was Fullerton). Most likely, this is the Pacific Ready Cut Home Model #385.

Dale and I found this little house in Fullerton, California (oops, I THINK it was Fullerton). Most likely, this is the Pacific Ready Cut Home Model #385 with a modified shed roof over the porch.

*

To learn more about Sears Homes, click here.

To read the next blog, click here.

To learn more about Pacific Homes, click here.

*   *   *

GVT #605: Exceptionally Well Planned!

July 13th, 2012 Sears Homes 6 comments

From 1995-2006, I lived in Southwestern Illinois, specifically Elsah, Alton and later, Godfrey.

While I was living in this area, I became enchanted with the topic of Sears Homes, and I spent countless hours of my life driving around Southwestern Illinois, staring at the pre-1940 architecture, hoping to find (and identify) a few kit homes.

One of my favorite finds in Alton was this Gordon Van Tine Model #605. Gordon Van Tine was another company that (like Sears) sold entire kit homes through a mail-order catalog. Number 605 was one of their more popular models. There are three of these houses in Alton. If someone in Alton could get me photos of the other two, I’d be very grateful!

To learn more about Gordon Van Tine, click here.

Gordon Van Tine #605 as seen in the 1922 catalog.

Gordon Van Tine #605 as seen in the 1922 catalog.

*

The testimonial at the bottom of the page gives an address for Model #605 in California! My kingdom for a picture of THIS house!

The testimonial at the bottom of the page gives an address for Model #605 in California! My kingdom for a picture of THIS house!

*

Floorplan for #605

Floorplan for #605

*

And heres my favorite #605 - in Alton, Illinois. What a beauty!

When I first started doing research in Alton, several people told me that *this* was a Sears kit house. As I started to learn about these other kit home companies, I finally realized that it *was* a kit house, but it was a kit home from Gordon Van Tine. In my experience, this is a common mistake. About 80% of the people who THINK they have a "Sears Home" are wrong. The majority DO have a kit home, but it's from another company.

*
To read the next fascinating blog, click here.

To learn more about Gordon Van Tine, click here.

Need to buy a house in Southwestern Illinois? Click here.

*   *   *

The Elsmore: Refinement and Comfort

May 3rd, 2012 Sears Homes 7 comments

If you only learn to identify five Sears Homes, one of them should be the Elsmore. It was a perennial favorite amongst kit home buyers, and for good reason. It was offered in two floor plans and both had several nice features, including spacious rooms, a living room fireplace, a kitchen that overlooked the back yard, and a super-sized front porch. It was attractive house with a smart floor plan.

In 1919, the 1,100-square-foot home sold for a mere $1,528 - a solid value. There was a little bit of extra room in the attic too, if someone was willing to do some work to transform the second story into living space. In some cases, people added dormers to the massive hipped roof to add a window or two.

The 1919 catalog page (shown below) promised “Refinement and Comfort Here.” The Sears catalog was famous for its puffery, but in this case, the promises made about the Elsmore were probably pretty accurate.

Want to read more about the history of the Elsmore? Click here

To order a copy of Rose’s newest book, click here.

Elsmore, as seen in the 1921 catalog.

Elsmore, as seen in the 1921 catalog.

*

The 1924 catalog testimonial

This testimonial - written by Mr. DeHaven of Glenshaw, PA appeared in the 1924 catalog. It would be fun to find this house today.

*

Elsmore in Cairo (now gone) 1921

This Elsmore was built at 1501 Commercial Avenue in in Cairo, Illinois. As of 2002, there was nothing but a vacant lot at that site. Mr. Fitzjearls house is long gone. Sears had a 40-acre mill in Cairo and there are many Sears Homes throughout Cairo, but not a single Elsmore.

*

1921 houses

Mr. Fitzjearl built an Elsmore at 1501 Commercial Avenue.

*

Sears Elsmore in Bedford, VA

Sears Elsmore in Bedford, VA (near Roanoke).

*

Sears Elsmore as een in 1916

In the 1916 catalog, the Elsmore sold for a mere $937.

*

*

Park Ridge, Il Dale

Dale Wolicki found this Elsmore in Park Ridge, Illinois. This house gets my vote for the most perfect Elsmore in America. Original windows, doors, siding and railings. Just amazing. Photo is courtesy of Dale Patrick Wolicki and can not be used or reproduced without written permission.

*

One of the most perfect Elsmores in the world is in Elgin, IL.

The second most perfect Elsmore in the world is in Elgin, IL. Notice the original railing!

*

Elsmore in Benld

This Elsmore has had a lot of "remodeling" but it still retains some original Elsmore features, such as the lone sash in the front porch attic. It's located in Benld, IL.

*

Clifton Forge

This Elsmore is in Clifton Forge, Virginia.

*

Sears Elsmore suffolk

This Elsmore is in downtown Suffolk.

*

Mounds, Illinois is very close to Cairo, which was home to a massive 40-acre Sears Mill in the 1920s and 30s. Not surprisingly, there are many Sears Homes throughout this area.

Mounds, Illinois is very close to Cairo, which was home to a massive 40-acre Sears Mill in the 1920s and 30s. Not surprisingly, there are many Sears Homes throughout this area.

*

Theres an abundance of Sears Homes in Takoma Park (DC area) too.

There's an abundance of Sears Homes in Takoma Park (DC area) too. Someone added a couple double-hung windows to the porch attic and turned it into living space.

*

Colonail Heiths

This Elsmore is somewhere in Virginia. Wow. Just wow. And not a good wow.

*

floor plan

These Elsmore was offered in this lone floor plan until the early 1920s when a second floor plan was offered.

*

The Elsmore came in two floor plans

The second floor plan had the same footprint, but the interior was very different, and it had a pair of windows in the dining room. If you scroll back up and look at these houses, you'll see most of them are "Floor plan #13192."*

*

beauty 1919

The Elsmore as it appeared in 1921.

*

Photo from Dale

Side by side comparison of the Elsmore in the catalog (left) and real life (right).

To learn more about Sears Homes, click here.

To learn about Wardway Homes, click here.

*   *   *

Starlight, Starbright, First Kit House I See Tonight…

April 28th, 2012 Sears Homes No comments

In the early 1910s, it’s probable that the Sears Starlight was their most popular model. In the early days, it was offered with and without an indoor bathroom.

In 1921, the Starlight had a significant model change. The small shed dormer in the attic was enlarged and changed to a hipped dormer with three windows. In addition, the pitch of the attic was made more steep, creating space for an additional room (for short people with a good tolerance of summertime heat).

The pre-1921 Starlights are miserable to try and identify because they are so simple, and they look like every other little house out there. Plus, before 1920, lumber in Sears Homes was not marked. Authentication of these pre-1921 Starlights requires measuring the home’s footprint and measuring individual rooms to affirm that it really is a Starlight, and not a “look-alike.”

Click here to learn more about Sears Homes.

In the 1919 catalog,

This little ad appeared in the the 1919 catalog, showing the many sizes and shapes of the Sears Starlight. This shows the houses with a myriad of dormers!

*

In 1920, the Starlight had the shed dormer (most of the time).

In 1920, the Starlight had the shed dormer (some of the time).

*

This Starlight in Boone, Iowa has a

This Starlight in Boone, Iowa has a traditional shed dormer.

*

But this little Starlight in Painesville had

But look at the dormer on this little Starlight in Painesville. It's a gabled dormer and it's really, really tiny. And the front porch roof is flat, and it's not an integral part of the house, as it is with the traditional Starlight. How confusing!!

*

Built in Castalia, Ohio, this

Built in Castalia, Ohio, this Starlight has a different railing, and I have no idea what the floor plan is, because those windows down the side are in the wrong place.

*

Detroit

Again, the railing is different and this one has a hipped dormer (rather than shed) and this appears to be a bathroom-less model.

*

Starlight

In the 1921 catalog, these interior photos were featured.

*

house

A view of the Starlight's dining room (1921 catalog).

*

Early starlights

The bathroom-less Starlight was offered into the 1920s.

*

1921 Starlight

In1921, the Starlight sold for $1,553.

*

Sears Starlight in Alton, Illinois.

Sears Starlight in Alton, Illinois.

*

This Starlight in Duquoin, IL is in mostly original condition.

This Starlight in Duquoin, IL is in mostly original condition.

To learn more about Sears Homes, click here.

To learn about Wardway Homes, click here.

*   *   *

An Abundance of Kit Homes in Tulsa (Updated!)

July 6th, 2011 Sears Homes 29 comments

Sears Homes in Tulsa?

That was my first thought when Rachel Shoemaker of Tulsa contacted me. She said that she thought there were several homes in her town.

Now if she’d been writing from Illinois, Indiana, Michigan or Ohio, I wouldn’t have been so surprised.

But Tulsa?

In the last 10 years, I’ve received probably 5,000 emails and I’ve never heard much from the folks in Oklahoma. In fact, Rebecca Hunter’s wonderful book, “Putting Sears Homes on the Map” lists states with known Sears Homes. Rebecca went through thousands of pages of old catalogs, noting all the testimonials from folks, and then compiled that info into one easy-to-use book. There are two states that have no kit homes listed: Oklahoma and Oregon.

Besides, Oklahoma didn’t become a state until 1907. They were still fighting off Injuns and would not have had time to read a 75-page instruction book on how to build a kit that contained 12,000 pieces of house. (I’ve watched 106 episodes of Gunsmoke. I know about this stuff.)

Rachel sent me a couple photos and I was impressed. And then Sunday night (July 3), I stayed up way too late driving the streets of Tulsa via Google Maps, and I found two more kit homes.

If you know the address of a kit home in Oklahoma, please leave a comment below!

Below is a compilation of what Rachel has found  (with a little help from me). All photos of extant homes are copyright 2011 Rachel Shoemaker and can not be reproduced without written permission.  Photo of Wardway Modern Home #105 is copyright 2010 Dale Wolicki.

And as an added note, if you enjoy these pictures, please leave a comment below for Rachel, as she has invested countless hours of her own time and money researching and photographing these houses.

This is an impressive array of kit homes, and this collection should be preserved and protected, and further research should be done. Don’t let this amazing chapter of Tulsa’s history fall back into the shadows of lost memories and forgotten treasures.

Westly

One of the distinctive features (inside) is that corner fireplace in the dining room! This is from the 1919 Sears Modern Homes catalog.

And in Oklahoma! Its had a lot of improvements but this Westly is still standing.  Photo is copyright Rachel Shoemaker and can not be reproduced without written permission.

Unfortunately, it's had a lot of "improvements" but this Westly in Tulsa is still standing.

Ar

The Arlington was a beautiful and spacious bungalow. This image is from the 1919 Sears Modern Homes catalog.

Arlington

Tulsa's Arlington is not a spot-on match, but it's pretty darn close. The front porch was truncated to allow for placement on a narrow lot. This was a very common "customization."

One distinguising feature of the Arlington is this crazy array of windows on the staircase side. There are a whole lot of windows going on here.

One distinguising feature of the Arlington is this crazy array of windows on the staircase side. There are a whole lot of windows going on here.

Floor plan of the first floor shows detail

Room arrangement of the first floor shows what a grandiose house this was. Note the spacious rooms and the maid's quarters!

Detail of the Arlingtons roof, which is also quite distinctive

Detail of the Arlington's roof, which is also quite distinctive

And the house in Tulsa is a perfect match.

And the house in Tulsa is a very good match. About 30-50% of Sears Homes were customized when built, and this Arlington has a few minor changes (such as the truncated porch) but those are fairly inconsequential. I'd say that this house is almost certainly a Sears Arlington.

Said to be the first Sears Home in Oklahoma, this Saratoga is in wonderful condition.

Said to be the first Sears Home in Oklahoma, this Saratoga is in wonderful condition.

The Saratoga, as seen in the 1921 Sears catalog.

The Saratoga, as seen in the 1921 Sears catalog.

Sara

And from the 1916 catalog. Note the big price difference between 1921 and 1916. "The War to End All Wars" created a housing shortage and hyperinflation in the cost of building materials.

The Avondale was built a

The Avondale was built at the Illinois State Fair (late 1910s) and furnished with items from the Sears Roebuck catalog. This post card shows the Avondale at the State Fair. Note the stained class windows on the front and flanking the fireplace. Nice house, and popular too.

Sears Avondale in Chelsea, OK. Was this the first Sears House in Oklahoma? Itll be fun to find out!

Sears Avondale in Chelsea, OK. Was this the first Sears House in Oklahoma? It'll be fun to find out! This picture shows the mirror image of the house above. Landscaping prevented taking a shot from the same side (as shown above).

Woodland

Woodland as seen in the 1921 Sears Modern Homes catalog.

Sears

This view of the Woodland shows those two windows flanking the front door, and it's also a good shot of that itty bitty window inside the dormer on the third floor. The closet window (small window between the two second floor windows) is gone, probably hidden underneath the 1940s shingle-type siding. It's very common to see these little closet windows covered over when the substitute sidings go up.

Sad

Sad little Woodland, all dressed down and waiting to die.

Close-up of porch column detail

Close-up of porch column detail

po

Those unique porch columns, together with the windows flanking the front door suggest this is a Sears Woodland.

Aladdin was another kit home company, but they were actually bigger than Sears. Sears stopped selling kit homes in 1940, but Aladdin continued on until 1981. Sears sold about 70,000 homes and Aladdin sold more than 75,000.

Aladdin was another kit home company, but they were actually bigger than Sears. Sears stopped selling kit homes in 1940, but Aladdin continued on until 1981. Sears sold about 70,000 homes and Aladdin (based in Bay City, Michigan) sold more than 75,000. The Aladdin Sunshine (shown above) was a fairly popular house for Aladdin.

A near perfect Aladdin Sunshine in Tulsa.

A nice little Aladdin Sunshine in Tulsa.

One of the biggest and best Aladdin kit homes was the Shadowlawn.

One of the biggest and best Aladdin kit homes was the Shadowlawn.

Al

Is it an Aladdin Shadowlawn? Tough to say without an interior inspection, but it sure is a nice match, and even has the porte cochere (carport). It's a real beauty.

The Shadowlawns living room, as seen in the 1919 catalog.

The Shadowlawn's living room, as seen in the 1919 catalog.

This is a kit home from Gordon Van Tine, a competitor of Sears in the kit home business.

This is a kit home from Gordon Van Tine, a competitor of Sears in the kit home business. Gordon Van Tine (Davenport, Iowa) probably sold about 50,000 kit homes. The "Roberts" (shown above) was a very popular house for GVT. Thanks to Dale Wolicki for the numbers on Aladdin and GVT.

Gordon Van Tine

Although the front porch has been altered a bit and the side porches have been closed in, it's still likely that this is a Gordon Van Tine "Roberts."

Perhaps my favorite find in Tulsa was this GVT 712 (as seen in the 1921 catalog).

Perhaps my favorite find in Tulsa was this GVT 712 (as seen in the 1921 catalog).

And here it is, in the flesh. A real live GVT #712 in Tulsa. This is not a very common house, and Ive only seen one other (in Shipman, IL).

And here it is, in the flesh. A real live GVT #712 in Tulsa. This is not a very common house, and I've only seen one other (in Shipman, IL).

The Hudson was offered in the

The Hudson was offered in the late 1920s and early 30s.

Here is Tulsas Hudson.

Rachel has spent some quality time sitting in front of this house and studying the details. She feels strongly that this is a GVT Hudson. I have a few niggling doubts, but it certainly bears further investigation. An interior inspection would settle the question once and for all. Either way, this house proves what makes identification challenging.

Its

It's the details around the front porch that trouble me. The Hudson does not have a transom, while this house does. The Hudson does not have exterior lights flanking the door, and the ornamentation around the door is more grandiose on the Tulsa house (compared to the GVT).

Montgomery Ward also sold kit homes, but they can be tough to find, especially in land as far south as Tulsa! Based on some educated guessing, fewer than 25,000 Wardway Homes were built. In Tulsa, we found Modern Home #105. It’s a modest little house, but it’s also a distinctive house with several eye-catching features. And perhaps best of all, “Farmers all over the country are giving this comfortable home the preference.”

To learn more about Wardway Homes, click here.

Notice the paired box windows on the right side of this floorplan. This is a very distinctive feature of #105. This catalog image shows a vestibule, but that feature disappeared in future catalogs.

Tulsa

Montgomery Ward kit house #105 in Tulsa. Note the pair of box windows and the steeply pitched roof.

Here's a #105 from the same side. This house (shown for comparison) is in North Belle Vernon, PA. Photo is courtesy of Dale Wolicki and can not be reproduced without written permission.

h

According to "Many More Historic Homes in Tulsa" (by John Brooks Walton - 2003), there was a Sears Corona in Tulsa which was torn down years ago. Walton states that this house was located at 618 S. Delaware in Tulsa. It's a real shame that this house was torn down, as this was one of Sears finest homes, and it was also one of their more spacious homes. As the heading states on this 1919 catalog page, it was a classic early 20th Century American bungalow. If the countless hours of work invested in this one single blog can accomplish ONE thing, perhaps it can be this: Maybe we can halt the destruction of any more irreplaceable, uniquely American and historically significant kit homes in Tulsa.

To buy Rose’s book, click here.

To read about the first Sears Home in Oklahoma, click here.

*   *   *