Archive

Posts Tagged ‘kit homes from gordon van tine’

Eighty Percent of the People Who Think They Have a Sears House Are Wrong.

June 1st, 2013 Sears Homes 8 comments

Yes, that’s a true fact.

Back in the day, I actually kept track of such numbers, and back in the day, I found that about 80% of the people who thought they had a Sears kit home were wrong.

Eighty percent.

Typically, these folks did in fact have a kit home, but it turned out to be a kit home from another company.

I doubt that there’s an adult alive today that hasn’t heard of Sears and Roebuck, but how many people have heard of Gordon Van Tine, Aladdin, Sterling, Harris Brothers or Lewis Manufacturing? How many people know that Montgomery Ward sold kit homes in the early 1900s?

So while the legend of a “kit house” might survive through the generations, the facts of the story often get confused.

Aladdin (based in Bay City, Michigan) actually sold more kit homes than Sears, and was in business far long than Sears, but still, when it comes to kit homes, people assume that all kit homes came from Sears. (Aladdin started selling mail-order kit homes in 1906 and stopped in 1981. Sears started in 1908 and stopped in 1940.)

Which leads me to the topic of today’s blog.

Last week, friend and indefatigable researcher Rachel Shoemaker discovered a blog about a “Sears House” in Melbourne, Florida. Rachel took one look at the house featured in the blog and realized, it was not a Sears House, but rather, a kit home sold by Gordon Van Tine.

To read the blog, click here.

In the blog, the house in Melbourne is misidentified as a Sears Gordon, but (thanks to researchers Mark Hardin and Rachel Shoemaker), we now know that this is a physical impossibility.

After doing some digging, Rachel and Mark found that the little Cape Cod style house was not only present, but occupied when the 1930 Census was conducted.

So this “Ready-Cut” house was already built and occupied in 1930. But the Sears Gordon did not appear in the Sears Modern Homes catalog until Spring 1931. And then there’s the fact that the Sears Gordon really doesn’t look much like the little house in Melbourne.

Again, this is a very common mistake.

And there’s another piece to this story. Rachel, who’s quite adept at finding kit homes via Google Maps, found that to the left of the little Cape Cod is another Gordon Van Tine house (Model #530). And to the right is a Gordon Van Tine Model #613, with a Gordon Van Tine garage!

There’s a story there, but what is it? How did three Gordon Van Tine homes end up in one cluster?

Based on my experience, it was probably a family enterprise. This was pretty common.

If you have any information to the back story of these three Gordon Van Tine houses, please oh please leave a comment below!

To read the original blog featuring this subject house, click here.

To visit Rachel’s blog, click here.

*  *  *

*

The auditors website shows the little cape cod in Melbourne, pre-restoration.

The auditor's website has a photo showing the little Cape Cod in Melbourne, pre-restoration.

*

GVT 620

The catalog page for the GVT 620 (1927). Hmmm, it looks a lot like the house above!

*

The Sears Gordon (which is what the above house is claimed to be), was not offered until 1931, and yet the little cape cod (shown in the photograph above) was occupied during the 1930 Census!

The Sears Gordon (which is what the above house is claimed to be), was not offered until 1931, and yet the little Cape Cod (shown in the photograph above) was occupied during the 1930 Census!

*

A side by side comparison makes it clear! The house on the

A side by side comparison makes it clear! The house on the left is the Melbourne house and the house on the right is the Sears Gordon.

*

Ooh, now thats a nice match!

Ooh, now that's a nice match! Why, those two houses look just alike!

*

In 1927, Gordon Van Tine published a promotional catalog titled, Proof of the Pudding, and in that catalog, it featured a Gordon Van Tine #620 (with the optional fireplace). If you compare this house with the house photos shown in the original blog link, youll see its a spot-on match!

In 1927, Gordon Van Tine published a promotional catalog titled, "Proof of the Pudding," and in that catalog, it featured a Gordon Van Tine #620 (with the optional fireplace). If you compare this house with the house photos shown in the original blog link, you'll see it's a spot-on match!

*

And just a couple weeks ago, I saw the GVT #620 on an episode of Undercover Boss.

And just a couple weeks ago, I spotted a GVT #620 on an episode of "Undercover Boss."

*

But wait, theres more! Rachel also found a GVT #530 next door to the GVT #620.

But wait, there's more! Rachel also found a GVT #530 next door to the GVT #620.

*

Oh yeah!

The double dormers make this house easy to spot. Gordon Van Tine Model #530 sits to the immediate left of the house featured in the blog (GVT #620). Photo is from auditor's website.

*

And she found a Gordon Van Tine #613 next door to the #530!

And she found a Gordon Van Tine #613 to the right of the GVT #620.

*

Wow

So how did Palmetto Street in Melbourne end up with a Gordon Van Tine #613 (shown above), a number #530 (with the double dormers) and a #620 (with the triple dormers)? And why isn't there a house in this cluster with just ONE dormer? Photo is from auditor's website.

*

house house

As mentioned above, misidentifying Sears Homes is a very common mistake. Last month in Staunton, Virginia, the owners of the home above were quite certain this was a Sears kit home. In fact, it turned out to be a kit home from Gordon Van Tine. And a lovely match, at that!

*

The owners of that house in Staunton were THRILLED to learn the true facts about their house, and it’s my hope the owner of the GVT #620 will be equally thrilled to learn the true facts about her beloved home in Melbourne.

*

To learn more about how to identify Sears Homes, click here.

To contact Rose, please leave a comment below.

*   *   *

“All My Friends Who Have Seen This House Are In Love With It” (Part II)

March 14th, 2013 Sears Homes 3 comments

Several days ago, I wrote a blog about an old Gordon Van Tine “Roberts” somewhere in Wheeling, West Virginia. The house was built in the 1920s by a fellow named Otto Friebertshauser. I found out about this house when I obtained a copy of Gordon Van Tine’s promotional booklet, “The Proof of the Pudding” (1927), a collection of testimonials from happy homeowners.

It was a beautiful house and a well-written testimonial but no mention of where in Wheeling this house was built! Almost 90 years had passed since Otto turned that 12,000-piece kit into a spacious home. Had the house been torn down? Was it still alive? And if it was still alive, was it still well?

Too many times to count, I’ve written and published such blogs, only to find that the subject house had subsequently been destroyed and/or was in pitiable shape and/or had been cut up into several apartments.

After the blog was finished, I sent a link to Jeremy Morris, Executive Director of the Wheeling National Heritage Area Corporation. In less than a day, Jeremy wrote back, saying that he’d found the house. And not only had Jeremy found the house, but he’d talked with the owners and he got me a photo of the house!

The owners and I were soon in contact, and I’m delighted to report that they love this house just as much as Otto Friebertshauser did. In fact, they’ve done an exemplary job of restoring it to its former grandeur. And they did not realize it was a kit house (as is the case about 90% of the time).

Thanks so much to the Wheeling National Heritage Area Corporation and to Jeremy Morris (Executive Director) for going out and searching for this house, and thanks to the home’s current owners for doing such a first-class job of preserving this fine old house.

As mentioned in the previous blog, Wheeling is apparently awash in kit homes, and I’ve already spotted a PERFECT Sears Crescent on National Street, almost across the road from the Dairy Queen. I’d be ever so grateful if some good soul could snap a photo of that house for me!

Click here to see the other kit homes I saw in Wheeling, WV.

To learn more about Gordon Van Tine, visit my buddy Dale’s website, devoted to Gordon Van Tine homes.

I’d love to come out to Wheeling soon and do a proper survey and give a talk. Please leave a comment below to contact Rose and let’s figure out how to make it so!

*   *   *

In the 1927 promotional brochure, Otto

In the 1927 promotional brochure, Otto Friebertshauser wrote, "All of my friends who have seen this house are in love with it." Otto even included a snapshot of his home.

*

Close-up of the text that appeared in the 1927 brochure.

Close-up of the text that appeared in the 1927 brochure.

*

Ottos home as seen in the 1920s.

Otto's home as seen in the 1920s.

*

In 1916, the Roberts (Ottos house) appeared on the cover.

In 1916, the "Roberts" (Otto's house) appeared on the cover.

*

Close-up of that pretty, pretty house.

Close-up of that pretty, pretty house.

*

The original catalog page showing The Roberts (1924).

The original catalog page showing "The Roberts" (1924).

*

According to this text, theres a Roberts in every state in the US.

According to this text, there's a Roberts in every state in the US.

*

The floorplan shows how spacious

As kit homes go, this one was unusually spacious.

*

send

A small room upstairs was devoted to space for the live-in maid! And that dressing room doesn't make much sense, as it was accessible only through the main hallway.

*

Ah, but heres the most interesting photo of all. This is the Roberts in Wheeling, then and now. Photo is

Ah, but here's the most interesting photo of all. This is the Roberts in Wheeling, then and now. Photo (on left) is copyright 2013 Wheeling National Heritage Area Corporation and may not be used or reproduced without written permission. Photo on right was taken by Otto Freibertshauser, and it's also a dandy photo.

*

Otto would be so pleased to see his house today!

Otto would be so pleased to see his house today! What a breath-taking beauty and it's been lovingly and thoughtfully maintained. And perhaps best of all, the original windows are still in place. Photo is copyright 2013 Wheeling National Heritage Area Corporation and may not be used or reproduced without written permission.

*

Ottos house dressed up for Christmas! Now this belongs on the cover of a Christmas card! So very pretty!

Otto's house dressed up for Christmas! Now this belongs on the cover of a Christmas card! Photo is copyright 2012 Frank Harrar and may not be used or reproduced without written permission.

*

To learn more about the kit homes I’ve found in Wheeling, click here.

Want to learn how to identify kit homes? Click here.

Can you snap a photo of that Crescent and send it to me? Please leave a comment below and I’ll contact  you.

Heres

Here's a photo of the Sears Crescent (1928). The one in Wheeling is way up on a hill, across the street from the Dairy Queen. I found it while "driving" via Google Maps.

*   *   *

Cooking - Off the Grid!

November 24th, 2012 Sears Homes 3 comments

As has become our annual tradition, hubby cooked our 18-pound turkey on his Weber Charcoal Grill. It was one of the most delicious birds I’ve ever enjoyed. The best part was that it was cooked 100% “off the grid.”

The charcoal is a no-brainer. Lots of people know how to use charcoal to cook their meat.

But the secret of a well-cooked bird  is the rotisserie attachment which spins the meat at a slow speed. This year, the small but powerful rotisserie motor was powered  by our new “Solar System,” three 15-watt solar panels which we recently installed at The Ringer Ranch.

These three photovoltaic panels convert the sun’s rays into electricity, which is stored in a 12-volt deep-cycle marine battery. The inverter (shown below) converts the 12-volt system into 120 volts, suitable for household use.

To learn more about how we installed these solar panels, click here.

Hubby proudly points out his delicious turkey spinning on the grill.

Hubby proudly points out his delicious turkey spinning on the grill.

*

Look

Our three 15-watt solar panels are on top of the shed roof.

*

The electrical items (inverter, solar controller and battery) are inside the shed.

The electrical items (inverter, solar controller and battery) are inside the shed. Notice the orange extension cord coming out of the inverter? That is powering the rotisserie.

*

The most amazing part is that the solar panels were charging the battery *faster* than the rotisserie motor was drawing off power.

The most amazing part is that the solar panels were charging the battery *faster* than the rotisserie motor was drawing off power. And this was at 8:00 am.

*

Safety first. Hubby uses the five-gallon bucket to keep the cords out of the wet dew.

Safety first. Hubby uses the five-gallon bucket to keep the cords out of the wet dew.

*

It was indeed a most splendiferous bird!

It was indeed a most splendiferous bird!

*

Want a “solar system” of your own? We did it for $351 (total cost). To buy your own, click here.

*

To learn more about Sears Homes, click here.

*

To read about a very happy Thanksgiving in 1918, click here.

*   *   *

Categories: Uncategorized Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

It’s Official: I’m Now a Ham (Part V)

November 20th, 2012 Sears Homes 3 comments

One of the most interesting features  of Ham Radio is that its operators are expected to have access to alternative energy sources during times of regional or national emergency.

After all, what good is it to have a Ham Radio if you can’t use it when the power goes out?

For as many years as I can remember, I have been utterly fascinated by alternative energy sources. Capturing a tiny drop of the sun’s massive nuclear-reactive power (386 billion billion megaWatts) is a  fascinating concept.

After several tours of Mike Neal’s very own “Radio Shack,” and after receiving several helpful tutorials on this topic from Mr. Neal (and lots of specific guidance), I was ready to take the plunge.

My “solar project” started in earnest about a month ago when Mike sent me an email to let me know that Harbor Freight was having a sale on solar panels. This was the very set that Mike had at his house and he said it was “a good solar set-up for the money.”

With a $30 coupon (gifted to me from a fellow Ham), I got the $229 solar panels for $159. (The original price for the panels was $229, with a sale price of $189. The $30 coupon got me to $159.)

Because I’m highly allergic to crowds and shopping areas and loud noises and small children and fluorescent lights, I paid the extra six bucks to have the unit shipped directly to my house. It was well worth it.

It took about 12 hours to install the whole rig, and my oh my, it was a fun project. And watching those photovoltaic cells turn the sunlight into electricity is every bit as fascinating as I’d thought it would be.

If I were queen of the world (and it shouldn’t be long now), I’d recommend that every homeowner in America have a set of these on their roof. It was a great learning experience. And I’ve shared all the nitty-gritty details below.

To read more about my experiences with Ham Radio, check out Part I, Part II, Part III and Part IV of this series.

House shed

The little shed in our back yard is now electrified, thanks to these three solar panels on the roof. Each panel produces 15 watts, for a total of 45 watts.

*

solar thunder

I'm not sure why a corporation would adopt the name "THUNDERBOLT" for their solar products. Nonetheless, it's a sound value and seems to be a well-made product.

*

Solar panels

The solar panels were set on a 2x4 which was fastened with screws into the roof and painted flat black. The PVC frame was secured to the 2x4 with 3/4" metal pipe clamps. This will enables us to change the angle of the panels (for winter and summer) without any major disassembling.

*

house house house

This shot shows the panels and 2x4 more closely. In a mere 12 hours, the solar panels have already been assaulted by both birds (far left) and pine straw (bottom).

*

Thinking about how to get the leads into the little shed took some thinking.

Figuring out how to get the leads into the little shed took some thinking. In the end, I decided to drill a hole (3/4") through the 2x4 (and the roofing sheathing below). I reasoned that it'd be easier to patch a clean hole through a piece of lumber rather than trying to patch a hole in an irregular surface (such as an old roofing shingle).

*

solar

Using stretchy weatherproofing tape (which probably has a much better name), I bound those three wires (from the three solar panels) together and fed them through the hole into the shed's interior. I purposefully used a lot of tape so it would fill the 3/4" hole. For the tiny gaps that remained, I used a compound putty substance (again, don't know the name but it looks a lot like Silly Putty). Back in the day, a contractor friend told me it was called "Dum Dum" because you use it to patch a dumb mistake. However, I'd like to point out that it should be called "Smart Smart" in this particular application.

*

Inside,

Inside, the wires drop down from above and into the controller (right side on the shelf above the battery). From there, the wires go into the 12-volt deep cycle Marine battery. Another set of wires carries the power from the battery back to the inverter (left side on the shelf). The inverter turns the 12-volt current into 120 volts (for household use).

*

The

The controller that came with the solar panels is quite impressive. The digital display is large and easy to read, and reports on the battery power (12.4 volts shown here). For $159, it's a pretty fancy set-up and a darn good deal.

*

Another nice bonus that came with this set are these 12-volt LED lights. They do a good job of illuminating the dark corners of our little shed.

Another nice bonus that came with this set are two of these 12-volt LED lights. They do a good job of illuminating the dark corners of our little shed. They plug into the front of the controller (as shown in the picture of the controller above).

*

The inverter (shown above) was not included in the kit. This 750-watt inverter also came from Harbor Freight. I also got it on sale. As I recall, it was $69 on sale for  $49, and I found a $10 coupon. Final price $39.

The inverter (shown above) was not included in the kit. This 750-watt inverter also came from Harbor Freight. I also got it on sale. As I recall, it was $69 on sale for $49, and I found a $10 coupon. Final price $39.

*

Part of the problem I encountered was that, despite my reading and studying, I didnt understand a whole lot about how these things work.

Part of the problem I encountered whilst doing this project was, despite my reading and studying, I didn't understand a whole lot about how all these things work together. I asked Mike Neal, "What's the difference between a 200-watt inverter and a 750-watt inverter?" Fact is, a 200-watt inverter was whole lot cheaper. Mike explained, "Think of the battery as a bucket full of water. You can draw that water out with a swizzle stick or a milk-shake straw. The 200-watt inverter is a swizzle stick. The 750-watt inverter is a milk-shake straw."

*

The

The other helper in this project was my wonderful neighbor, Mike Mancini. I told him that I needed a deep-cycle marine battery and he got me a good deal on one at a local marine parts supply company. Plus, he gave me a ride out to the place and then hefted it out of his truck and out to my shed. This battery weighs about 50 pounds. I set it up on cinder blocks to make it easier to access, and I put the OSB down because I'd heard that batteries might discharge if placed directly atop masonry.

*

Fie dollahs

You may notice the fine-looking wires shown in the picture above (of the battery). I bought these booster cables at General Dollar Store and paid $5 for the whole affair. I then cut the wires off from the clips and used them for the controller-to-battery run and the battery-to-inverter run. It's 10-gauge stranded copper wire.

*

The

The last part of the project required anchoring the panels to the roof. In that the panels sit so high above the roof, they'll become a dandy sail in strong winds. Our solution was to tether the pvc frame to the opposite side of the shed. For the tether, I used 10-gauge stranded copper grounding wire. May seem like a waste, but I recently bought a spool of it to ground a couple antennas and masts and such. Seems I had about 400 feet left over from those other projects.

*

Solar

Close-up of the tether on the PVC frame. It's not super taut, but it doesn't need to be. It's anchored into the steep side of the shed roof with an eye-bolt.

*

Hubby and I spent countless hours figuring out the correct angle for these panels. There were many factors such aas the many tall trees in our yard,

Hubby and I spent countless hours figuring out the correct angle for these panels. There were many factors such as the big old tall trees in our yard. After the "Solar System" was all set up, we were both AMAZED and pleased to see that it started charging immediately. What was so amazing? It was a dark, cold, gloomy overcast day. I can hardly wait to see how it does with a little sunlight!

*

Total cost of the entire project:

Solar Panels - $159 plus $6 shipping (and tax)

Interstate battery - $114

750-watt inverter - $39

Battery terminals - $8

Wiring - $5  (thanks Dollar General!)

Incidentals - about $20 (zip ties, pipe clamps, tape)

Total investment:  $351

Entertainment value: Endless!  :)

*

To learn more about why Ham Radio is so relevant and important TODAY, click here.

To read about Sears Homes, click here.

If you wish to contact Rosemary, please leave a comment below.

*

Categories: Uncategorized Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

GVT #605: Exceptionally Well Planned!

July 13th, 2012 Sears Homes 5 comments

From 1995-2006, I lived in Southwestern Illinois, specifically Elsah, Alton and later, Godfrey.

While I was living in this area, I became enchanted with the topic of Sears Homes, and I spent countless hours of my life driving around Southwestern Illinois, staring at the pre-1940 architecture, hoping to find (and identify) a few kit homes.

One of my favorite finds in Alton was this Gordon Van Tine Model #605. Gordon Van Tine was another company that (like Sears) sold entire kit homes through a mail-order catalog. Number 605 was one of their more popular models. There are three of these houses in Alton. If someone in Alton could get me photos of the other two, I’d be very grateful!

To learn more about Gordon Van Tine, click here.

Gordon Van Tine #605 as seen in the 1922 catalog.

Gordon Van Tine #605 as seen in the 1922 catalog.

*

The testimonial at the bottom of the page gives an address for Model #605 in California! My kingdom for a picture of THIS house!

The testimonial at the bottom of the page gives an address for Model #605 in California! My kingdom for a picture of THIS house!

*

Floorplan for #605

Floorplan for #605

*

And heres my favorite #605 - in Alton, Illinois. What a beauty!

When I first started doing research in Alton, several people told me that *this* was a Sears kit house. As I started to learn about these other kit home companies, I finally realized that it *was* a kit house, but it was a kit home from Gordon Van Tine. In my experience, this is a common mistake. About 80% of the people who THINK they have a "Sears Home" are wrong. The majority DO have a kit home, but it's from another company.

*
To read the next fascinating blog, click here.

To learn more about Gordon Van Tine, click here.

Need to buy a house in Southwestern Illinois? Click here.

*   *   *

Another Gordon Van Tine Kit Home in Lake Mills, Wisconsin!

June 25th, 2012 Sears Homes 1 comment

In September and November 2011, I traveled to Lake Mills, Wisconsin to do more research on my Aunt Addie, who was allegedly murdered by her husband, Enoch Fargo. It’s a fascinating story and you can learn more about that here.

Whilst there, I discovered a handful of kit homes in Lake Mills. Click here to see photos of those houses.

More recently, my friend Rachel sent me a picture of a very unique house sold by Gordon Van Tine. Immediately, I recognized it as a house I’d seen in Lake Mills. I asked folks in Lake Mills if they could get me a photo of the house and they gladly obliged. Scroll down to see this very interesting house!

And as Rachel Shoemaker observed, the GVT #126 was also built in Mechanicsville, Ohio (according to the testimonial in the 1913 catalog) and she also found one in Fayette, Ohio!

From the 1913 Gordon Van Tine house

House Plan #126 from the 1913 Gordon Van Tine catalog.

*

1913 catalog

Close-up of #126. Note the flare at the bottom of the dormer's columns.

*

house

Close-up of the floorplan.

*

Lake Mills

A small snapshot at the bottom of the catalog page shows an interior shot of the living room. Notice the heavy drapes over the entrance to the stairwell.

*

Dawn Stewart

Here's what I *think* could be GVT #126 in Lake Mills (on Lake Street). (Photo is copyright 2012 Dawn Stewart and may not be used or reproduced without permission.)

*

Joeylynn Mattson

Another shot of the GVT #126. Notice that the front door is not centered on the Lake Mills house and yet the catalog house has a centered door. However, the living room spans the entire width of the house, so this would be a simple change to make. (Photo is copyright 2012 Joeylynn Mattson and may not be used or reproduced without written permission.)

*

Angie Hallmark

A better view of that front door. (Photo is copyright 2012 Angie Hallmark and may not be used or reproduced without written permission.)

*

compare dawn

Is this the GVT #126? I'm still not sure, but it's mighty close. That flare at the bottom of the dormer is a very unusual feature, and the house in Lake Mills is a beautiful match to the catalog image. The rest of the features are so very close that it does seem likely that the house in Lake Mills is the GVT #126. (Photo on the left is copyright 2012 Angie Hallmark and may not be used or reproduced without written permission.)

*

Addie

And here's the reason I became interested in Lake Mills in the first place. The above is a picture of my great Aunt Addie (on the left) and her sister, my great grandmother (Anna Hawley Hoyt Whitmore). Addie and Anna were the children of Julia Hawley Hoyt and her husband, Homer. Julia and Homer's families both had deep roots in the Lake Mills area, and their children were born and raised in Jefferson County. According to "A History of Lake Mills," Addie was shot and killed by her husband in 1901. Addie was 29 years old at the time.

*

To learn more about Gordon Van Tine houses, click here.

To read what the funeral director told me about Addie’s burial, click here.

*   *   *

The Prettiest Kit Home You Ever Saw (in Tahlequah, Oklahoma)

December 21st, 2011 Sears Homes No comments

More kit homes have been found in Tahlequah! To read the most recent update, click here.

Dear friend and indefatigable researcher Rachel Shoemaker has found an abundance of kit homes in Oklahoma, and recently, she found one of the prettiest Gordon Van Tine “Roberts” that I have ever seen - anytime and anywhere!  (Gordon Van Tine was a competitor of Sears in the kit home business. GVT sold about 50,000 kit homes from 1910 - 1945.)

This kit home is located in Tahlequah, Oklahoma which was the original capital of the Cherokee Nation in 1838. According to Wikipedia, Tahlequah became a settlement in 1832. Street signs in the city are printed in both English and the Cherokee language.

I’m told that Tahlequah is a lovely city, located at the western edge of the Ozark Mountains, and it’s also the home of Merle Travis, Sonny Sixkiller (football player) and Chad Smith, Principal Chief of the Cherokee Nation.

To learn more about kit homes, click here.

To learn more about the kit homes in Oklahoma, click here.

To learn more about Addie Hoyt Fargo, click here.

GVT Roberts as seen in the 1921 catalog.

GVT Roberts as seen in the 1921 catalog.

GVT Roberts in Tahlequah, OK

GVT Roberts in Tahlequah, OK, and it's a beauty! Like the house above, this also has the two-story porch on the left side. (Photo is copyright 2011, Rachel Shoemaker and can not be used or reproduced without written permission.)

Rober

The GVT Roberts has had several additions through the years, but still looks much like the catalog page shown above. (Photo is copyright 2011, Rachel Shoemaker and can not be used or reproduced without written permission.)

Im not sure why this house has a periscope.

I'm not sure why this house has a periscope. (Photo is copyright 2011, Rachel Shoemaker and can not be used or reproduced without written permission.)

Street signs are printed in both English and in Cherokee language.

Street signs are printed in both English and in Cherokee language. (Photo is copyright 2011, Rachel Shoemaker and can not be used or reproduced without written permission.)

To contact Rachel Shoemaker, please leave a comment below.  She’s done extensive research on the kit homes in Oklahoma, and has traveled countless miles, researching and documenting these historically significant homes. We’re both puzzled as to how and why so many kit homes landed here, but it’s time that someone hired Rachel to do a proper survey of this impressive collection of Oklahoma’s architectural treasure trove of kit homes.  Heretofore, all the work she’s done has been at her own expense.

*   *   *